M100AL1 - Multitek M100AL1 Current Transducer 1Phase AC Auxiliary Power Sensing RMS...
- Part Number:
- M100AL1
- Model Number:
- M100AL1
- Make:
- MULTITEK
- Lead Time:
- Available
- Qty In Stock:
- Available
Multitek M100AL1 Current Transducer 1Phase AC Auxiliary Power Sensing RMS Simple Type: Transducer
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- APPLIED STANDARDS:General: IEC 688 / BS 6253 / VDE / VDI 2192
- Calibration temperature: 23°C
- Class: ±0.2 % complying with IEC 688
- Class of climate: HSE complying with DIN 40040 -3 complying with VDE/VDI 3540
- cU.L. Approval: File No E157034
- EMC: Emissions EN50081-2; Immunity EN50082-1
- Enclosure Code: Case IP 50 / terminals IP 30; Complies with IEC 529; BS 5490 DIN 40050
- Fixing: Snap on to DIN rail 35 x 7.5 mm; complies with DIN-EN 50022; BS 5584
- Functional temperature: -25 to +70°C
- HF interference test: EHF 2.5kV 1MHz complying with IEC 255-4
- Impulse test: EMC 5kV transient complying with IEC 801 / EN55020
- INSULATION:Test voltage: 4kV RMS 50Hz 1min. between Input / Case / Auxiliary / Output
- Load influence: <0.1 %
- Load resistance volts: 1, 5 & 10 volts >1 kOhm
- Mounting: Any position
- No load voltage: <27 V
- Overload: <2 x rated value at full load
- Protection class: II complying with IEC 348; BS 4753 / DIN 57411 /VDE 0411
- Radio screening: RFI degree N complies with VDE 0875
- Relative humidity: 95% non condensing
- Response time: <200 msec for 0-99 % at full load
- Ripple: <0.5% peak-peak at full load
- Safety: BS EN61010; DIN 57411 / VDE 0411; ANSI C37
- Stability: 0.05 % per annum non cumulative
- Storage temperature: -55 to +85°C
- Surge withstand: IEC 801 / EN 55020; ANSI C37-90a
- Temperature coefficient: 0.01% / °C (100 ppm / °C)
- Temperature coefficient: 0.02% per °C (100 ppm / °C)
- Warm up time: <15 min
- Working temperature: 0 to +60°C
Applications
- None Available
Aliases
- None Available
